We recommend consulting professional help if you room unfamiliar v installing toilet fixtures.

You are watching: How high should you hang a shower curtain rod

Tools and Materials:
\"*\"
Allen Wrench
\"*\"
Screwdriver
\"*\"
Level
\"*\"
Drill
• To avoid the threat of property damage, execute not secure the wall brackets come acrylic shower walls. Instead, secure the wall surface brackets come the finished wall surface material just above the acrylic wall sets.• unless you encounter a stud, every screw need to be secured to the wall using one anchor.• when determining the height for the shower rod, take it into consideration the length of the shower curtain with hooks. • Rod might be shortened by cutting equal amounts from each end. • For best fit, shower head curtain have to be 6\" - 12\" broader than shower head rod.
For 60\" standard Tub
\"*\"
mountain rod roughly 3\" inside the allude a right rod is normally mounted. The midpoint of the rod should extend several inches past the exterior rim that the tub.

See more: How Much Was A Bottle Of Whiskey In 1880 ? What Is The Meaning Of Sidebuster


For 60\" Oval Tub
\"*\"
escape upon bath tub model, mountain rod between 6\" and 8\" from center line that the tub. The middle section of the rod should curve just outside the edge of the tub.

Step 1
\"*\"
review the bent Shower rod Mounting Instructions over to determine appropriate rod placement.

Step 2
\"*\"
Assemble bent shower rod. Hand-tighten continuing to be screws. Do not use set screws in ~ this time.

Step 3
\"*\"
have someone assist you measure. Host rod increase to desired position, one person at each end, to check height and location. Making sure that pole is level, usage a pencil to lightly score marks at the top and also bottom the the wall surface plate. Set the rod down.

Step 4
\"*\"
eliminate the retaining screws. Different the wall brackets native the rod. Leave the swivel connectors on the rod.

Step 5
\"*\"
place the brackets ago on the wall at the pencil marks.

Step 7
\"*\"
using a 1/4\" drill bit, drill screw hole as marked. Make certain hole is clean of dust. Insanity anchor into hole till flush through surface. Install 4 anchors uneven a feet is on a stud.

Step 9
\"*\"
ar rod, v swivel connectors attached, into wall surface brackets. Examine for levelness. Screw in retaining screws and also tighten.

You room using an outdated browser. Some functions of this website might require a newer version come operate.