From: atmosphere-standard (atm) atmosphere-technical (at) bar (bar) decibar (dbar) millibar (mbar) barye (cgs unit) (barye) centimeter of mercury (cmHg) centimeter of water (4 °C) (cmH20) ft of mercury (conv.) (ftHg) ft the water (39.2 °F) (ftH20) in the mercury (conv.) (inHg) in that water (39.2 °F) (inH20) kg-force every mm² (kgf/mm²) kip per in² (kip/in²) mm that mercury (mmHg) mm that water (3.98 °C) (mmH20) pascal (Pa) hectopascal (hPa) kilopascal (kPa) megapascal (MPa) gigapascal (GPa) pound per yd² (lb/yd²) pound per ft² (lb/ft²) lb per in² (lb/in² or psi) poundal per ft² (pdl/ft²) short ton per ft² (sh tn/ft²) torr (torr)


You are watching: Lb/fts^2 to psi

To: atmosphere-standard (atm) atmosphere-technical (at) bar (bar) decibar (dbar) millibar (mbar) barye (cgs unit) (barye) centimeter of mercury (cmHg) cm of water (4 °C) (cmH20) ft that mercury (conv.) (ftHg) ft of water (39.2 °F) (ftH20) in that mercury (conv.) (inHg) in of water (39.2 °F) (inH20) kg-force per mm² (kgf/mm²) kip per in² (kip/in²) mm the mercury (mmHg) mm that water (3.98 °C) (mmH20) pascal (Pa) hectopascal (hPa) kilopascal (kPa) megapascal (MPa) gigapascal (GPa) pound per yd² (lb/yd²) lb per ft² (lb/ft²) lb per in² (lb/in² or psi) poundal per ft² (pdl/ft²) brief ton per ft² (sh tn/ft²) torr (torr)
Answer:
Send me your comments.
Get a Widget because that this Calculator
© lifwynnfoundation.org
Share this Calculator & Page
*



See more: What Are The Major Body Of Water In New Mexico ? History: The Politics Of Water

*

Calculator Use

Pressure is a scalar top quality reflecting exactly how force acts on a surface.

ns = F/A

Where p is same to pressure, F is the typical force and also A is area. Due to the fact that pressure is derived from force and also area, plenty of units for pressure straight relate force to area. Some are obvious, such as pounds every square inch, but even the SI traditional Pascal is actually an expression the one Newton every square meter.

How to convert Units that Pressure

Conversions room performed by making use of a conversion factor.By knowing the counter factor, converting in between units can become a straightforward multiplication problem:

S * C = E

Where S is our starting value, C is our conversion factor, and also E is our end converted result.

To simply transform from any unit right into pascals, for example, indigenous 5 bar, just multiply by the conversion worth in the right tower in the table below.

5 bar * 100000 < (Pa) / (bar) >= 500000 Pa

To convert from Pa into units in the left pillar divide by the worth in the right obelisk or, main point by the reciprocal, 1/x.

500000 Pa / 100000 < (Pa) / (bar) > = 5 bar

To convert amongst any devices in the left column, say from A come B, you deserve to multiply by the aspect for A to convert A into Pascals then divide by the aspect for B to transform out of Pascals. Or, you can discover the single factor you require by dividing the A element by the B factor.

For example, to transform from bar come pounds per square customs you would certainly multiply by 100000then divide by 6894.757. Or, main point by 100000/6894.757 = 14.503774. So, to convert directly native bar come pounds per square inch, you multiply by 14.503774.